How To Install Nest Camera Outdoor

Install Nest Cam Outdoor

Make sure you've set upwardly your Nest Cam Outdoor with the Nest app before you lot mount information technology. This commodity picks up where that 1 left off.

Lookout a video overview

Here's a video you can watch that will walk you through the steps to install your Nest Cam Outdoor. Read below for boosted information or if you need help with whatever of the steps.

How to prepare and install Nest Cam Outdoor

1. Get started

Make sure you've set up your Nest Cam Outdoor with the Nest app before you mount it. This article picks upward where that one left off. If yous haven't selected a spot to put your photographic camera nevertheless, here are some tips to help y'all decide. Where to put your camera so you can keep an eye on what you lot want > How to protect your Nest camera from tampering > Walk over to the intended spot with your phone or tablet (just not your camera all the same), and see whether you can get a Wi-Fi signal on your device. This will give you a full general thought about Wi-Fi in that expanse. If there's no signal at all, you'll need to observe another spot. Retrieve about the path of the power cable on its way to the outlet. We've included cable clips that can adhere it to walls, eaves, and other surfaces. The clips keep the cable secure and give information technology a cleaner await. Directly sunlight can cause glare and heat up your camera beyond the recommended 104° F (twoscore° C). Look for a shaded spot such as an eave or overhang to install your camera. Be sure to review the Safety Guidelines for mounting your photographic camera.

2. Tools you'll need

Many of the items you'll demand are included in the box: mounting magnet, camera wall plate, adapter wall plate, cablevision clips to secure your cablevision, wall screws, and even wall anchors for hard surfaces similar brick or stone. To install the wall plate and cable clips, you'll need a Philips screwdriver and a drill with a 3/32" bit. If you'll be using the wall anchors, you'll also need a 7/32" masonry drill scrap and a hammer.

three. Options for plugging in your camera

Nest Cam Outdoor's total power cablevision length is 25 ft (7.5m). You'll need to plug information technology into an outlet so it tin can stream video 24/vii and ship alerts. Yous have two options:

Use an outdoor outlet

The easiest option is to plug it into an outdoor outlet. Yous might desire to install a lockable "while in use" encompass over the outlet to preclude your camera from being unplugged.

Use an adapter

If you don't have an outdoor outlet, yous can employ a light socket adapter, which converts a porch or landscaping light into a power outlet.

four. Mountain your camera

Now that you've prepared your supplies, and decided where yous desire to put your camera, it'due south time to mount it.

Learn near your camera's mounting magnet

Nest Cam Outdoor'due south versatile mounting magnet helps you signal your photographic camera exactly where you lot desire. The back of Nest Cam Outdoor attaches magnetically to the double-sided magnet mount. This lets you mount your camera ii ways: you lot can stick the photographic camera and its mounting magnet to a magnetic surface like a galvanized steel gutter, or you can install the included metallic wall plate on a non-metal surface and stick the camera with its mounting magnet to the plate.

Then you can twist and turn the photographic camera on the mounting magnet to get the view yous want. We designed it with a broad range of move.

If y'all end up installing your camera upside downwardly, such as nether an eave, you can rotate your photographic camera on the mounting magnet and then that information technology'south right side upwards. Or if the camera needs to stay upside down, for case if you lot're running the cablevision to an outlet above the camera, you can leave your camera as information technology is and flip the video right side up with the Nest app.

You have two options for installing your Nest Cam Outdoor. Both are detailed in the sections below.

Option ane: Install the wall plate and mount your camera on brick, wood, or other non-metal surface

If you lot don't have a metallic surface that the mounting magnet can adhere to, you lot tin install the camera'south metal wall plate. So, you tin stick your Nest Cam and its mounting magnet to the plate and rotate your camera to get the image you want.

one. Connect the camera to the power adapter Insert the camera's USB connector into the ability adapter. Important: Printing the collar all the way in and twist clockwise to lock it. This will help ensure a weatherproof seal.

two. Plug in the power cable and adapter

Make certain there's enough length from the outlet to the camera. Yous can temporarily run the cablevision along the path you've planned for it, including eaves and any right-bending bends forth walls.

three. Check Wi-Fi coverage with your camera

Agree your photographic camera upwardly where you want to install it, and view the video stream with the Nest app. If the camera tin't connect to Wi-Fi, or if the video stream is interrupted, you might need to pick another location where the signal is stronger. Even a few inches can make a difference. Run into more Wi-Fi troubleshooting suggestions in the following article. Troubleshooting when your camera is offline> If you lot need to install your camera beyond the range of your existing network, you lot can endeavour using a Wi-Fi extender.

four. Install the wall plate

Once you've made certain your camera can stream video from the spot you've chosen, information technology's time to install the camera'due south wall plate. Remove the protective sticker and bankroll foam from the wall plate. We recommend you lot starting time drill pilot holes with a iii/32" flake, then attach the wall plate with the screws. If the wall is fabricated of a material like brick or rock, you may need to apply the included wall anchors. Use a 7/32" masonry chip to drill holes for the anchors. Gently tap each ballast into the wall with a hammer until it'southward flush with the surface. And so attach the wall plate with the screws.

five. Attach photographic camera to wall plate

Once the plate is secure, adhere the mounting magnet to the wall plate. Then attach Nest Cam to the mounting magnet and aim it where you similar. Now you can remove the sticker from your Nest Cam'southward lens; information technology's only there for protection during shipping and installation. You can check your camera's video stream in the Nest app to fine-melody its position.

6. Secure the cable

Side by side, y'all'll need to secure the power adapter and cable. Don't skip this step, which makes it harder for your camera to be accidentally dislodged or tampered with.

Option 2: Attach your camera to a metallic surface using the magnet

You can securely attach your camera to a metal surface made of steel or iron. Go along in listen, the mounting magnet won't stick to other metals like aluminum or copper.

1. Connect the camera to the power adapter Insert the camera's USB connector into the power adapter. Important: Press the neckband all the fashion in and twist clockwise to lock information technology. This will help ensure a weatherproof seal.

2. Plug in the power cable and adapter

Make sure there'southward enough length from the outlet to the camera. Yous can temporarily run the cablevision along the path you've planned for it, including eaves and any correct-angle bends along walls.

iii. Attach camera

Attach the mounting magnet to the back of the photographic camera, and place the other side on the metal surface. Since the magnetic power of dissimilar metal surfaces tin can vary, test that the grip is strong enough to securely agree your camera. If yous endeavour to attach your photographic camera to a curved surface, similar a light pole, the magnet won't exist able to make total contact and it might not hold. And then we recommend attaching it to a flat spot on the metal surface.

iv. Cheque Wi-Fi coverage with your camera

If the photographic camera can't connect to Wi-Fi, or if the video stream is interrupted, you might need to option another location where the betoken is stronger. Even a few inches can make a deviation. See more Wi-Fi troubleshooting suggestions in the following article. Troubleshooting when your camera is offline> If you demand to install your camera across the range of your existing network, you can try using a Wi-Fi extender. If you oasis't done so yet, remove the sticker from your Nest Cam's lens; it'south only in that location for protection during shipping and installation.

5. Secure the cable

Once you've made certain your camera can stream video from its location, yous'll need to secure the ability adapter and cable. Don't skip this step, and so that it makes it harder to accidentally dislodge or be tampered with.

5. Secure the ability adapter and cable

Whichever way yous mounted your camera, y'all'll need to attach your power adapter and cablevision to a wall or other surface to go on it secure. This also gives everything a tidy look.

1. Install the first cablevision clip

Install the start clip within half dozen inches (15cm) of your camera. This can assist secure your camera's position and prevent harm if it e'er gets knocked off of its magnetic mount. Here's how to install each prune: We recommend drilling airplane pilot holes beforehand. Utilize a 3/32" (ii mm) scrap for wood and similar materials. Or, if you're installing the wall anchors on brick or stone, utilize a 7/32" (6 mm) masonry bit and so gently tap the anchor into the pigsty with a hammer. Insert the cablevision into the clip. Screw the clip directly into the wall, or into the anchor. Note: If y'all're tightening the spiral with a drill, be careful not to drill into the cable itself. The cablevision should be fully inserted into the prune, keeping it away it from the screw

2. Install the ability adapter

We recommend installing the adapter at to the lowest degree 18 inches (50 cm) in a higher place the ground in example of flooding or deep snowfall. We included an adapter wall plate for this purpose. Place the adapter plate with the flat side facing the wall. Drill a hole and insert a wall ballast if needed. Use one of the screws to mount the plate. And then snap the adapter on.

3. Install the residual of the cable clips

Install the 2d cable clip shut to where the USB band connects to the power adapter. Install the 3rd clip shut to the outlet so that the cable volition be harder to unplug. Install every bit many of the other clips as y'all need to route the cable from your camera to the outlet.

four. Tidy up the extra cable (optional)

If you lot end upwards with extra cablevision length, here are some tips to go on things looking great: The cable includes a velcro strap, so yous tin coil the cable and secure information technology with the strap. Then y'all can conceal it behind something else, like landscaping or an overhang. Or you lot can install a junction box along the route to comprise the extra cable.

Y'all can paint the power string and the cable clips to match your home so they blend in and are harder to spot. If you added a junction box, you can paint it as well. Don't paint the power adapter or the camera itself.

half-dozen. End up

Remove the sticker on the lens if you haven't already. Wipe off whatsoever dust or dirt with a soft lint-gratuitous textile

You can paint the cablevision and the clips to match your home.Do non pigment the photographic camera, this can bear upon performance and void your warranty.

vii. Start using your camera

Was this helpful?

How can nosotros improve it?

Source: https://support.google.com/googlenest/answer/9228553?hl=en

Posted by: hayescamagirse.blogspot.com

Share this post